close ：
当套接字的引用计数为0的时候才会引发 TCP 的四分组连接终止序列；
shutdown：
不用管套接字的引用计数就激发TCP的正常连接终止序列；
这里由一个SO_LINGER套接字选项
struct linger {
int l_onoff; /* 0 = off, nozero = on */
int l_linger; /* linger time，POSIX specifies units as seconds */
};
shutdown：SHUT_RD
关闭连接的读这一半，进程不能再对这样的套接字调用任何读操作；
在套接字上不能再发出接收请求，进程仍可往套接字发送数据，套接字接收缓冲区中所有数据被丢弃，再接收到的任何数据由TCP丢弃，对套接字发送缓冲区没有任何影响；
程序模拟：
client：
#define SERV_PORT 8000 int main(int argc, const char * argv[]){ struct sockaddr_in serverAdd; struct sockaddr_in clientAdd; bzero(&serverAdd, sizeof (serverAdd)); serverAdd.sin_family = AF_INET; serverAdd.sin_addr.s_addr = htonl(INADDR_ANY); serverAdd.sin_port = htons(SERV_PORT); socklen_t clientAddrLen; int listenfd = socket (AF_INET, SOCK_STREAM, 0); int yes = 1; setsockopt(listenfd, SOL_SOCKET, SO_REUSEADDR, ( void *)&yes, sizeof(yes)); if (listenfd < 0) { printf("创建socket失败\n"); return -1; } int bindResult = bind(listenfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd)); if (bindResult < 0) { printf("绑定端口失败\n"); close(listenfd); return -1; } listen(listenfd, 20); int connfd; unsigned char recvMsg[246988]; unsigned long long totalSize = 0; clientAddrLen = sizeof(clientAdd); connfd = accept (listenfd,(struct sockaddr *)&clientAdd,&clientAddrLen); if (connfd < 0) { printf("连接失败\n"); return -1; } else{// 这里我们用于测试，只接收一个连接 close(listenfd); } shutdown(connfd,SHUT_RD); while (1) { ssize_t readLen = read(connfd, recvMsg, sizeof(recvMsg)); if (readLen < 0) { printf("读取失败 errno = %d\n",errno); close(connfd); return -1; } else if (readLen == 0) { printf("读取完成 totalSize = %llu\n",totalSize); close(connfd); return -1; } else { totalSize += readLen; printf("readLen:%ld\n",readLen); } } return 0;}
server:
#define SERV_PORT 8000
int main(int argc, const char * argv[])
{
struct sockaddr_in serverAdd;
struct sockaddr_in clientAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = htonl(INADDR_ANY);
serverAdd.sin_port = htons(SERV_PORT);
socklen_t clientAddrLen;
int listenfd = socket(AF_INET, SOCK_STREAM, 0);
int yes = 1;
setsockopt(listenfd,
SOL_SOCKET, SO_REUSEADDR,
(void *)&yes, sizeof(yes));
if (listenfd < 0) {
printf("创建socket失败\n");
return -1;
}
int bindResult = bind(listenfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (bindResult < 0) {
printf("绑定端口失败\n");
close(listenfd);
return -1;
}
listen(listenfd, 20);
int connfd;
unsigned char recvMsg[246988];
unsigned long long totalSize = 0;
clientAddrLen = sizeof(clientAdd);
connfd = accept(listenfd,(struct sockaddr *)&clientAdd,&clientAddrLen);
if (connfd < 0) {
printf("连接失败\n");
return -1;
}
else{
// 这里我们用于测试，只接收一个连接
close(listenfd);
}
shutdown(connfd,SHUT_RD);
while (1) {
ssize_t readLen = read(connfd, recvMsg, sizeof(recvMsg));
if (readLen < 0) {
printf("读取失败 errno = %d\n",errno);
close(connfd);
return -1;
}
else if (readLen == 0) {
printf("读取完成 totalSize = %llu\n",totalSize);
close(connfd);
return -1;
}
else
{
totalSize += readLen;
printf("readLen:%ld\n",readLen);
}
}
return 0;
}
打印信息：
client：
连接成功
发送成功 totalSize = 5000
server
读取完成 totalSize = 0
是因为读关闭了，套接字接收缓冲区的数据直接被丢弃掉了，如果将服务端的shutdiwn替换成close会如下
读取失败 errno = 9
#define EBADF 9 /* Bad file descriptor */
说明：如果服务端调用shutdown关闭读之后，客户端再往已经收到RST分节的服务端进行write操作，会引发错误导致程序终止
抓包信息：
需要C/C++ Linux服务器架构师学习资料私信“资料”（资料包括C/C++，Linux，golang技术，Nginx，ZeroMQ，MySQL，Redis，fastdfs，MongoDB，ZK，流媒体，CDN，P2P，K8S，Docker，TCP/IP，协程，DPDK，ffmpeg等），免费分享
shutdown：SHUT_WR
关闭连接的写这一半，进程不能再对这样的套接字调用任何写操作；
在套接字上不能再发出发送请求，进程仍可从套接字接收数据，套接字发送缓冲区中的内容被发送到对端，后跟正常的TCP连接终止序列（即发送FIN），对套接字接收缓冲区无任何影响；
程序模拟：
client：
struct sockaddr_in serverAdd; bzero(&serverAdd, sizeof(serverAdd)); serverAdd.sin_family = AF_INET; serverAdd.sin_addr.s_addr = inet_addr(SERV_ADDR); serverAdd.sin_port = htons(SERV_PORT); int connfd = socket(AF_INET, SOCK_STREAM, 0); int connResult = connect (connfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd)); if (connResult < 0) { printf("连接失败\n"); close(connfd); return; } else { printf("连接成功\n"); } ssize_t writeLen; char sendMsg[200000] = {0}; unsigned long long totalSize = 0; if (1) { writeLen = write(connfd, sendMsg, sizeof(sendMsg)); if (writeLen < 0) { printf("发送失败 errno = %d\n",errno); return; } else { totalSize += writeLen; printf("发送成功 totalSize = %zd\n",totalSize); } shutdown(connfd,SHUT_WR); sleep(20); }
server：
int main(int argc, const char * argv[])
{
struct sockaddr_in serverAdd;
struct sockaddr_in clientAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = htonl(INADDR_ANY);
serverAdd.sin_port = htons(SERV_PORT);
socklen_t clientAddrLen;
int listenfd = socket(AF_INET, SOCK_STREAM, 0);
int yes = 1;
setsockopt(listenfd,
SOL_SOCKET, SO_REUSEADDR,
(void *)&yes, sizeof(yes));
if (listenfd < 0) {
printf("创建socket失败\n");
return -1;
}
int bindResult = bind(listenfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (bindResult < 0) {
printf("绑定端口失败\n");
close(listenfd);
return -1;
}
listen(listenfd, 20);
int connfd;
unsigned char recvMsg[246988];
unsigned long long totalSize = 0;
clientAddrLen = sizeof(clientAdd);
connfd = accept(listenfd,(struct sockaddr *)&clientAdd,&clientAddrLen);
if (connfd < 0) {
printf("连接失败\n");
return -1;
}
else{
// 这里我们用于测试，只接收一个连接
close(listenfd);
}
while (1) {
ssize_t readLen = read(connfd, recvMsg, sizeof(recvMsg));
if (readLen < 0) {
printf("读取失败 errno = %d\n",errno);
close(connfd);
return -1;
}
else if (readLen == 0) {
printf("读取完成 totalSize = %llu\n",totalSize);
close(connfd);
return -1;
}
else
{
totalSize += readLen;
printf("readLen:%ld\n",readLen);
}
}
return 0;
}
打印信息：
client：
连接成功
发送成功 totalSize = 200000
server：
readLen:1448
readLen:1448
readLen:1448
readLen:1448
… …
readLen:1448
readLen:1448
readLen:3072
读取完成 totalSize = 200000
说明：客户端发送字节200000的大小大于TCP套接字发送缓冲区的大小，数据全部成功送达服务端，但是在调用shutdown关闭写之后不能再调用write方法，会引起错误终止程序，这里和上面的关闭读有差别；
shutdown：SHUT_RDWR
关闭连接的读和写；
close：l_onoff ＝ 0（默认情况） ：
在套接字上不能再发出发送或接收请求，套接字发送缓冲区中的内容被发送到对端，如果描述符引用计数变为0，在发送完发送缓冲区的数据后，跟以正常的TCP连接终止序列（即发送FIN），套接字接收缓冲区中的内容被丢弃；
程序模拟：
client：
struct sockaddr_in serverAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = inet_addr(SERV_ADDR);
serverAdd.sin_port = htons(SERV_PORT);
int connfd = socket(AF_INET, SOCK_STREAM, 0);
int connResult = connect(connfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (connResult < 0) {
printf("连接失败\n");
close(connfd);
return;
}
ssize_t writeLen;
char sendMsg[5000] = {0};
for (int i = 0 ; i<sizeof(sendMsg); i++) {
sendMsg[i] = 'a';
}
while (1) {
writeLen = write(connfd, sendMsg, sizeof(sendMsg));
if (writeLen < 0) {
printf("发送失败\n");
return;
}
else
{
printf("发送成功 writeLen = %zd\n",writeLen);
}
close(connfd);
break;
}
server：
#define SERV_PORT 8000
int main(int argc, const char * argv[])
{
struct sockaddr_in serverAdd;
struct sockaddr_in clientAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = htonl(INADDR_ANY);
serverAdd.sin_port = htons(SERV_PORT);
socklen_t clientAddrLen;
int listenfd = socket(AF_INET, SOCK_STREAM, 0);
int yes = 1;
setsockopt(listenfd,
SOL_SOCKET, SO_REUSEADDR,
(void *)&yes, sizeof(yes));
if (listenfd < 0) {
printf("创建socket失败\n");
return -1;
}
int bindResult = bind(listenfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (bindResult < 0) {
printf("绑定端口失败\n");
close(listenfd);
return -1;
}
listen(listenfd, 20);
int connfd;
unsigned char recvMsg[246988];
unsigned long long totalSize = 0;
clientAddrLen = sizeof(clientAdd);
connfd = accept(listenfd,(struct sockaddr *)&clientAdd,&clientAddrLen);
if (connfd < 0) {
printf("连接失败\n");
return -1;
}
else{
// 这里我们用于测试，只接收一个连接
close(listenfd);
}
sleep(1);
close(connfd);
while (1)
{
ssize_t readLen = read(connfd, recvMsg, sizeof(recvMsg));
if (readLen < 0) {
printf("读取失败\n");
break;
}
else if (readLen == 0) {
printf("读取完成 totalSize = %llu\n",totalSize);
break;
}
else
{
totalSize += readLen;
printf("readLen:%ld\n",readLen);
}
}
return 0;
}
先运行服务端，再运行客户端，打印信息如下：
client：
发送成功 writeLen = 5000
server：
读取失败
抓包信息：
说明：通过抓包可以看出客户端的5000字节的数据都成功发送到服务端，服务器里面有一秒的休眠才关闭连接就是为了接收完这些数据，关闭连接以后再来通过read读取接收缓冲区的数据却读取失败，说明已经被内核丢弃了，而客户端的数据是已经成功写到发送缓冲区，即使关闭连接，发送缓冲区的数据不会被丢弃，会正常发送到服务器，发送完成以后，接着发送终止连接的第一个FIN分节；
close：l_onoff ＝ 1，l_linger ＝ 0：
在套接字上不能再发出发送或接收请求，如果描述符引用计数变为0，RST被发送到对端，连接的状态被置为CLOSED（没有TIME_WAIT状态），套接字发送缓冲区和接收缓冲区中的内容被丢弃；
模拟程序（套接字发送缓冲区数据被丢弃）：
client：
struct sockaddr_in serverAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = inet_addr(SERV_ADDR);
serverAdd.sin_port = htons(SERV_PORT);
int connfd = socket(AF_INET, SOCK_STREAM, 0);
int connResult = connect(connfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (connResult < 0) {
printf("连接失败\n");
close(connfd);
return;
}
else
{
printf("连接成功\n");
}
ssize_t writeLen;
char sendMsg[200000] = {0};
unsigned long long totalSize = 0;
struct linger so_linger;
so_linger.l_onoff = 1;
so_linger.l_linger = 0;
setsockopt(connfd,
SOL_SOCKET,
SO_LINGER,
&so_linger,
sizeof so_linger);
if (1) {
writeLen = write(connfd, sendMsg, sizeof(sendMsg));
if (writeLen < 0) {
printf("发送失败 errno = %d\n",errno);
return;
}
else
{
totalSize += writeLen;
printf("发送成功 totalSize = %zd\n",totalSize);
}
close(connfd);
}
server：
int main(int argc, const char * argv[])
{
struct sockaddr_in serverAdd;
struct sockaddr_in clientAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = htonl(INADDR_ANY);
serverAdd.sin_port = htons(SERV_PORT);
socklen_t clientAddrLen;
int listenfd = socket(AF_INET, SOCK_STREAM, 0);
int yes = 1;
setsockopt(listenfd,
SOL_SOCKET, SO_REUSEADDR,
(void *)&yes, sizeof(yes));
if (listenfd < 0) {
printf("创建socket失败\n");
return -1;
}
int bindResult = bind(listenfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (bindResult < 0) {
printf("绑定端口失败\n");
close(listenfd);
return -1;
}
listen(listenfd, 20);
int connfd;
unsigned char recvMsg[246988];
unsigned long long totalSize = 0;
clientAddrLen = sizeof(clientAdd);
connfd = accept(listenfd,(struct sockaddr *)&clientAdd,&clientAddrLen);
if (connfd < 0) {
printf("连接失败\n");
return -1;
}
else{
// 这里我们用于测试，只接收一个连接
close(listenfd);
}
while (1) {
sleep(1);
ssize_t readLen = read(connfd, recvMsg, sizeof(recvMsg));
if (readLen < 0) {
printf("读取失败 errno = %d\n",errno);
close(connfd);
return -1;
}
else if (readLen == 0) {
printf("读取完成 totalSize = %llu\n",totalSize);
close(connfd);
return -1;
}
else
{
totalSize += readLen;
printf("readLen:%ld\n",readLen);
}
}
return 0;
}
打印信息：
client：
连接成功
发送成功 totalSize = 200000
server：
readLen:91224
读取失败 errno = 54
抓包信息：
说明：调用close的时候RST分节发送出去，携带89777到91224字节的数据，然后丢弃发送缓冲区中的数据，因此服务器再向已经收到RST分节的套接字read失败，返回错误码：
#define ECONNRESET 54 /* Connection reset by peer */
再看下面的模拟程序（套接字接收缓冲区数据被丢弃）：
client：
struct sockaddr_in serverAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = inet_addr(SERV_ADDR);
serverAdd.sin_port = htons(SERV_PORT);
int connfd = socket(AF_INET, SOCK_STREAM, 0);
int connResult = connect(connfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (connResult < 0) {
printf("连接失败\n");
close(connfd);
return;
}
else
{
printf("连接成功\n");
}
ssize_t writeLen;
char sendMsg[200000] = {0};
unsigned long long totalSize = 0;
while (1) {
writeLen = write(connfd, sendMsg, sizeof(sendMsg));
if (writeLen < 0) {
printf("发送失败 errno = %d\n",errno);
return;
}
else
{
totalSize += writeLen;
printf("发送成功 totalSize = %zd\n",totalSize);
}
}
server：
int main(int argc, const char * argv[])
{
struct sockaddr_in serverAdd;
struct sockaddr_in clientAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = htonl(INADDR_ANY);
serverAdd.sin_port = htons(SERV_PORT);
socklen_t clientAddrLen;
int listenfd = socket(AF_INET, SOCK_STREAM, 0);
int yes = 1;
setsockopt(listenfd,
SOL_SOCKET, SO_REUSEADDR,
(void *)&yes, sizeof(yes));
if (listenfd < 0) {
printf("创建socket失败\n");
return -1;
}
int bindResult = bind(listenfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (bindResult < 0) {
printf("绑定端口失败\n");
close(listenfd);
return -1;
}
listen(listenfd, 20);
int connfd;
unsigned char recvMsg[246988];
unsigned long long totalSize = 0;
clientAddrLen = sizeof(clientAdd);
connfd = accept(listenfd,(struct sockaddr *)&clientAdd,&clientAddrLen);
if (connfd < 0) {
printf("连接失败\n");
return -1;
}
else{
// 这里我们用于测试，只接收一个连接
close(listenfd);
}
struct linger so_linger;
so_linger.l_onoff = 1;
so_linger.l_linger = 0;
setsockopt(connfd,
SOL_SOCKET,
SO_LINGER,
&so_linger,
sizeof so_linger);
while (1) {
sleep(1);
ssize_t readLen = read(connfd, recvMsg, sizeof(recvMsg));
if (readLen < 0) {
printf("读取失败 errno = %d\n",errno);
close(connfd);
return -1;
}
else if (readLen == 0) {
printf("读取完成 totalSize = %llu\n",totalSize);
close(connfd);
return -1;
}
else
{
totalSize += readLen;
printf("readLen:%ld\n",readLen);
}
close(connfd);
}
return 0;
}
打印信息：
client：
连接成功
发送成功 totalSize = 200000
发送成功 totalSize = 400000
发送成功 totalSize = 600000
(lldb)
然后程序返回错误被终止
server：
readLen:246988
读取失败 errno = 9
#define EBADF 9 /* Bad file descriptor */
抓包信息：
说明：服务端调用close以后直接发送RST分节，接收缓冲区数据被丢弃，客户端向已经收到RST分节的套接字write会返回错误终止程序
close：l_onoff ＝ 1，l_linger !＝ 0：
在套接字上不能再发出发送或接收请求，套接字发送缓冲区中的内容被发送到对端，如果描述符引用计数变为0，在发送完发送缓冲区的数据后，跟以正常的TCP连接终止序列（即发送FIN），套接字接收缓冲区中的内容被丢弃，如果在连接变为CLOSED状态前延滞时间到，那么close返回EWOULDBLOCK错误；
模拟程序：
client：
struct sockaddr_in serverAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = inet_addr(SERV_ADDR);
serverAdd.sin_port = htons(SERV_PORT);
int connfd = socket(AF_INET, SOCK_STREAM, 0);
int connResult = connect(connfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (connResult < 0) {
printf("连接失败\n");
close(connfd);
return;
}
else
{
printf("连接成功\n");
}
ssize_t writeLen;
char sendMsg[200000] = {0};
unsigned long long totalSize = 0;
struct linger so_linger;
so_linger.l_onoff = 1;
so_linger.l_linger = 3;
setsockopt(connfd,
SOL_SOCKET,
SO_LINGER,
&so_linger,
sizeof so_linger);
if (1) {
writeLen = write(connfd, sendMsg, sizeof(sendMsg));
if (writeLen < 0) {
printf("发送失败 errno = %d\n",errno);
return;
}
else
{
totalSize += writeLen;
printf("发送成功 totalSize = %zd\n",totalSize);
}
int cr = close(connfd);
if (cr < 0) {
printf("失败 errno = %d\n",errno);
}
}
server：
int main(int argc, const char * argv[])
{
struct sockaddr_in serverAdd;
struct sockaddr_in clientAdd;
bzero(&serverAdd, sizeof(serverAdd));
serverAdd.sin_family = AF_INET;
serverAdd.sin_addr.s_addr = htonl(INADDR_ANY);
serverAdd.sin_port = htons(SERV_PORT);
socklen_t clientAddrLen;
int listenfd = socket(AF_INET, SOCK_STREAM, 0);
int yes = 1;
setsockopt(listenfd,
SOL_SOCKET, SO_REUSEADDR,
(void *)&yes, sizeof(yes));
if (listenfd < 0) {
printf("创建socket失败\n");
return -1;
}
int bindResult = bind(listenfd, (struct sockaddr *)&serverAdd, sizeof(serverAdd));
if (bindResult < 0) {
printf("绑定端口失败\n");
close(listenfd);
return -1;
}
listen(listenfd, 20);
int connfd;
unsigned char recvMsg[20000];
unsigned long long totalSize = 0;
clientAddrLen = sizeof(clientAdd);
connfd = accept(listenfd,(struct sockaddr *)&clientAdd,&clientAddrLen);
if (connfd < 0) {
printf("连接失败\n");
return -1;
}
else{
// 这里我们用于测试，只接收一个连接
close(listenfd);
}
while (1) {
sleep(1);
ssize_t readLen = read(connfd, recvMsg, sizeof(recvMsg));
if (readLen < 0) {
printf("读取失败 errno = %d\n",errno);
close(connfd);
return -1;
}
else if (readLen == 0) {
printf("读取完成 totalSize = %llu\n",totalSize);
close(connfd);
return -1;
}
else
{
totalSize += readLen;
printf("readLen:%ld\n",readLen);
}
}
return 0;
}
打印信息：
client：
连接成功
发送成功 totalSize = 200000
server：
readLen:20000
… …
readLen:20000
读取完成 totalSize = 200000
抓包信息：
说明：数据成功发送，且发送正常的FIN分节
